6 Easy Ways To Save Fuel Motorcycles

There are several things to consider, namely driving style and make corrections in the sector of machinery and some supporting components.

The following steps should be done

1. Increase engine compression
One thing to remember the higher the engine compression, combustion of fuel in the engine combustion chamber more perfect. When that happens then the amount of fuel required is also less and less. But this does not mean having to cut the piston cylinder head, but enough to reduce the thickness of packing or using a piston with a high dome.
2. Adjust the valve
Another step that is not important is to position the valve. One thing to remember, not to position the valve is too loose or too tight. Because when it happens will result in sluggish motor power.
The way to measure the position of the valve is fitted with gas when the attractive force with a little tug was quite felt that his position is just right valve. With that position, the intake of fuel required is also not too much. Because every time we pull firmly to the gas motor racing, it was also running too much fuel.
3. Servicing the carburetor or injector

Service is not just cleaning spuyer or gasoline lines of dirt. It is also necessary to reset the position of buoys and air screw. This is important, the article carburetor is the device for supplying fuel into the engine combustion chamber.
When the position of a float is not appropriate, or carburetor dirty then supply also faltered. Every time we pull the gas so that the motor is not stalled, it was also the intake of fuel aspirated combustion chamber is also getting bigger.
Similarly, if the motor has been using the device as a means of nebulization injector fuel is sprayed into the combustion chamber. Set or reset the fuel pump, clean the device. The more smoothly a fuel spray is also the more efficient fuel consumption.
Not only that. The accuracy of the fuel intake also makes the more perfect combustion in the engine. With perfect combustion, the power generated is also more perfect. Happenings energy scale is varied.

4. Replace or clean the spark plugs
 

As is known, the spark plug is a device to ignite a fire or a spark of fire is needed in the combustion process. When spark plugs fire imperfect or fail to fire with a good sprinkling, will be failed fuel.
Every time a spark occurred and failed to burn, that's when a lot of fuel burned in vain. As a result, the amount of fuel consumed was greater.
Because of that, you should clean the spark plugs on a regular basis and adjust the density between the axis of the spark plug with spark plug head (which is at the base of the spark plug). If the plugs are not feasible should be replaced, better than the wasteful cost of fuel once every day.
5. Pay attention to the brake position
 

Unnoticed and unknown motorcycle owners, mechanics with without deliberately put the brake of the brake shoe too tight. As a result, between the two objects as if attached to or makes the motor in the braking position.
As a result of such a position, then the power required to drive motors are also getting bigger. Because the motor in the braking position, but the driver pulled the gas lever with a bang. As a result, the supply of fuel needed are also more and more machines, the motor becomes wasteful.
6. Change the style of driving
 

Unwittingly, the riders often ride their bike in high speed and then suddenly braked alias driving in speed is not constant.
Did you know that menggeber motor brakes and then immediately step on the gas makes the fuel intake also bigger?
Similarly, the interesting habits of the gas lever repeatedly with hard (blayer its lay language). It should be avoided, the article every time you pull the gas, while the same intake of fuel into the combustion chamber is also increased. Another way to avoid one is to play a lot of clutch slippage.
Perform the pull of the gas is slowly and steadily when you want to increase the motor acceleration. Position the gears in the correct position in accordance with the speed and engine speed when the motor runs.
Also avoid the heavy use of accessories and do not need or do not have an important function. Because, the heavier the load the motor power required to drive motors are also getting bigger. The greater the energy required means, the greater the fuel consumed.